{"product_id":"off-the-shelf-tmdsemu110-u-xds110-jtag-debugging-probe-bottom-board-programmer","title":"Off-the-shelf TMDSEMU110-U XDS110 JTAG Debugging Probe Bottom Board Programmer","description":"TMDSEMU110-U\u003cbr\u003e XDS110 JTAG debugging probe\u003cbr\u003e The Texas Instruments XDS110 is a new debug probe (emulator) for TI embedded processors. The XDS110 replaces the XDS100 family while supporting a wider range of standards (IEEE1149.1, IEEE1149.7, SWD) in a single pod. In addition, all XDS debug probes support kernel and system tracking in all ARM and DSP processors with embedded trace buffers (ETBs).\u003cbr\u003e \u003cbr\u003e The TI XDS110 connects to the target board via TI 20-pin connectors (with multiple adapters for TI 14-pin and ARM 10-pin and ARM 20-pin) and to the host PC via USB2.0 high speed (480Mbps). It also has two additional connections: an auxiliary 14-pin port connector for EnergyTrace™, a full-duplex UART port and four general-purpose I\/ OS, and an extended 30-pin connector for connecting the XDS110 EnergyTrace HDR plug-in.\u003cbr\u003e \u003cbr\u003e If you use Code Composer Studio, version 7.0 or later is required.\u003cbr\u003e \u003cbr\u003e The XDS110 package includes:\u003cbr\u003e \u003cbr\u003e XDS110 debug pod\u003cbr\u003e 20-pin debugging cable\u003cbr\u003e 14 pin auxiliary cable\u003cbr\u003e TI 20 pin to TI 14 pin converter adapter\u003cbr\u003e TI 20-pin to ARM Cortex 20-pin converter adapter\u003cbr\u003e TI 20-pin to ARM Cortex 10-pin converter adapter\u003cbr\u003e USB cable\u003cbr\u003e Auxiliary cable distribution board\u003cbr\u003e Quick start Guide\u003cbr\u003e Supported devices:\u003cbr\u003e \u003cbr\u003e SimpleLink MCU (CC13xx, CC26xx, CC3x, MSP432)\u003cbr\u003e C2000, TM4C12x and Hercules microcontrollers\u003cbr\u003e Sitara (AM335x, AM43xx, AM57xx, AM65xx, AMIC1xx)\u003cbr\u003e Automotive SoC (TDAx ADAS, DRAx Infotainment System)\u003cbr\u003e Millimeter wave sensor (IWR\/AWR14xx, IWR\/AWR16xx, IWR68xx)\u003cbr\u003e C674x and C66x (Keystone I) floating point DSP\u003cbr\u003e C642x and C645x\u003cbr\u003e 66AK2 and TCI66x Multi-Core DSP + ARM® SoC (Keystone II)\u003cbr\u003e C55x Low power DSP\u003cbr\u003e UCD3x digital power supply device\u003cbr\u003e PGA970 SoC\u003cbr\u003e Other TI SoCs with PRU, C674x, C66xx, Cortex M, Cortex R, and Cortex A cores\u003cbr\u003e Unsupported devices:\u003cbr\u003e MSP430 microcontroller\u003cbr\u003e ARM9 based processors using adaptive clocks, such as OMAPL13x, AM1xxx, DM64xx\u003cbr\u003e AWR12xx millimeter wave sensor\u003cbr\u003e C54x\u003cbr\u003e C62x, C670x, C671x, C672x, C640x and C641x\u003cbr\u003e trait\u003cbr\u003e Serial line debugging (SWD) and Serial Line Output (SWO) are available for selected microcontrollers and wirelessly connected microcontrollers\u003cbr\u003e Kernel and system tracking is available through ETB in selected ARM and DSP processors\u003cbr\u003e For more information about the tracking capabilities of a particular device, see its Technical Reference Manual (TRM)\u003cbr\u003e You will need:\u003cbr\u003e \u003cbr\u003e Installation of Code Composer Studio v7 (or later) or a compatible third party development environment.\u003cbr\u003e A target board with one of the compatible JTAG connectors.\u003cbr\u003e You may need:\u003cbr\u003e \u003cbr\u003e Adapters that allow connections to target boards with different JTAG connectors\u003cbr\u003e Shipping information:\u003cbr\u003e \u003cbr\u003e Product box size: 260mm x 200mm x 50mm (10.0in x 8.0in x 2.0in)\u003cbr\u003e Weight: 240g (8.0oz)\u003cbr\u003e \u003cbr\u003e \u003cbr\u003e \u003cbr\u003e peculiarity\u003cbr\u003e The XDS110 is the latest entry-level debug probe (emulator) for TI embedded processors. Designed to be a complete solution that provides JTAG and SWD connectivity at low cost, the XDS110 is the go-to debug probe for entry-level debugging of TI microcontrollers, processors, and SimpleLink devices.\u003cbr\u003e \u003cbr\u003e The XDS110 replaces XDS100 technology and is the first debug probe to support all TI devices with JTAG, cJTAG, and SWD\/SWO debug ports in a single product. In addition, all ARM and DSP devices that support embedded Trace buffers (ETBs) can use core processor and system trace.\u003cbr\u003e \u003cbr\u003e The XDS110 is also the first in the XDS series of debug probes with EnergyTrace for the MSP432 and its add-on module XDS110 EnergyTrace HDR for SimpleLink wireless connected devices. EnergyTrace is a technology that allows the measurement of the true energy and power consumption of the target board, which can measure up to 75mA of native current and up to 800mA of additional modules. For added flexibility, EnergyTrace's same physical connection also features a UART port and four GPIOs for full hardware control.\u003cbr\u003e \u003cbr\u003e The XDS110 is designed to replace the aging XDS100 series JTAG debugger with higher JTAG and cJTAG data throughput, adding support for ARM serial line debug mode at the same cost.\u003cbr\u003e \u003cbr\u003e Following the trend of reduced space on modern TI development boards, the XDS110 uses the standard TI 20-pin connector as the primary JTAG connection to the target. In addition to this, all variants feature modular target configuration adapters for TI and ARM standard JTAG connectors (adapter availability varies by model).\u003cbr\u003e \u003cbr\u003e The XDS110 series supports traditional IEEE1149.1 (JTAG) as well as IEEE1149.7 (cJTAG) and ARM Serial Line Debugging (SWD)\/ Serial Line Output (SWO) and operates at interface levels from +1.8V to +3.6V.\u003cbr\u003e \u003cbr\u003e IEEE1149.7 or Compact JTAG (cJTAG) is a significant improvement over traditional JTAG as it supports all of its features using only two pins and can be used with selected TI wireless connected microcontrollers.\u003cbr\u003e \u003cbr\u003e Serial line debugging (SWD) is a debugging mode that uses two pins (JTAG uses four) and transfers data at a higher clock rate than JTAG. The Serial Line Output (SWO) adds a pin that allows simple tracing operations to be performed on selected Cortex M4 microcontrollers.\u003cbr\u003e \u003cbr\u003e The XDS110 supports a USB2.0 full speed (11Mbps) or high speed (480Mbps) connection to the host computer.\u003cbr\u003e \u003cbr\u003e The XDS110 series is fully compatible with TI's Code Composer Studio IDE. This combination provides a complete hardware development environment that includes an integrated debug environment, compiler, and full hardware debugging and tracing capabilities on selected TI microcontrollers, processors, and wirelessly connected microcontrollers.\u003cbr\u003e \u003cbr\u003e Other XDS products:\u003cbr\u003e \u003cbr\u003e XDS110 EnergyTrace HDR\u003cbr\u003e XDS200\u003cbr\u003e XDS560v2 system tracking with USB\u003cbr\u003e XDS560v2 system tracking with USB and Ethernet\u003cbr\u003e XDS560v2 PRO TRACE receiver\u003cbr\u003e \u003cbr\u003e \u003cbr\u003e \u003cbr\u003e XDS110 debug pod\u003cbr\u003e 20-pin debugging cable\u003cbr\u003e 14 pin auxiliary cable\u003cbr\u003e TI 20 pin to TI 14 pin converter adapter\u003cbr\u003e TI 20-pin to ARM Cortex 20-pin converter adapter\u003cbr\u003e TI 20-pin to ARM Cortex 10-pin converter adapter\u003cbr\u003e USB2.0 data cable\u003cbr\u003e English Quick Start guide flyer\u003cbr\u003e Korean quick Start Guide flyer\u003cbr\u003e Terms and Conditions leaflet\u003cbr\u003e \u003cimg referrerpolicy=\"no-referrer\" src=\"http:\/\/sc04.alicdn.com\/kf\/H166d5e3c09974020afc7f92ceca95660A\/273653796\/H166d5e3c09974020afc7f92ceca95660A.png\"\u003e\u003cimg referrerpolicy=\"no-referrer\" src=\"http:\/\/sc04.alicdn.com\/kf\/Hc147f256bec54ef0acef38800e88c8f42\/273653796\/Hc147f256bec54ef0acef38800e88c8f42.png\"\u003e","brand":"Shenzhen Futian JJSR Electronics Company","offers":[{"title":"Default Title","offer_id":53594836009265,"sku":null,"price":0.0,"currency_code":"CNY","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0967\/3313\/5153\/files\/He403a67aa7a04d39808f4218d263f9542.webp?v=1775351524","url":"https:\/\/www.jjsrelec.com\/products\/off-the-shelf-tmdsemu110-u-xds110-jtag-debugging-probe-bottom-board-programmer","provider":"Shenzhen Futian JJSR Electronics Company","version":"1.0","type":"link"}