Join our community
Stay updated on the latest innovations and insights in automation.
K215128 FR10GG50V6 Insurance 6A 500V Fuse GG/GL 10x38 120KA
¥2.40
Skip to product information
10pcs K215128 FR10GG50V6 Insurance 6A 500V Fuse GG/GL 10x38 120KA
Product description
Fuse is a kind of protection of electrical and electronic components, it is usually in series in the circuit, when the fault current increases to a certain value, its own fuse and cut off the circuit, to protect the purpose of other equipment in the circuit, in the current protection component is the most commonly used fuse.
Fuse use precautions:
1, the protection characteristics of the fuse should be compatible with the overload characteristics of the protected object, taking into account the possible short-circuit current, choose the corresponding breaking capacity of the fuse;
2, the rated voltage of the fuse to adapt to the line voltage level, the rated current of the fuse should be greater than or equal to the rated current of the melt;
3, the rated current of the fuse at all levels of the line should be matched accordingly, and the rated current of the previous melt must be greater than the rated current of the next melt;
4, the fuse of the melt should be used as required, and it is not allowed to increase the melt or replace the melt with other conductors.
Fuse inspection:
1. Check whether the rating of the fuse and melt is compatible with the protected equipment;
2, check the appearance of the fuse for damage, deformation, porcelain insulation part for flicker discharge traces;
3, check whether the contact points of the fuse are intact, close contact, and there is no overheating phenomenon;
4. Whether the fuse signal indicator is normal.
Fuse service maintenance:
1. When the melt is fusing, the reasons for the fusing should be carefully analyzed. The possible reasons are:
1) Short circuit fault or overload operation and normal fusing;
2) The use time of the melt is too long, the melt is oxidized or the temperature is high in operation, so that the melt characteristics change and break;
3) There is mechanical damage when the melt is installed, which makes its cross-sectional area smaller and causes error in operation.
2. When disassembling the melt, it is required to:
1) Before installing the new melt, it is necessary to find out the cause of the melt meltdown, and do not disassemble the melt for test sending before determining the cause of the meltdown;
2) When replacing the new melt, check whether the rating of the melt matches the protected equipment;
3) When replacing the new melt, check the burn inside the fuse tube, if there is serious burn, the fuse tube should be replaced at the same time. When the porcelain fuse is damaged, it is not allowed to replace it with other materials. When replacing the melt, pay attention to filling the filler.
3, the fuse should be repaired at the same time as the power distribution device:
10×38mm gG 400/500/690V
Full range protection gG type 10 x 38mm fuses are suitable for industrial use with voltage options of 400VAC,500VAC,690VAC, most fuses are equipped with optional indicators. The fuse can optionally have a built-in firing pin. All cylindrical fuses have ceramic housing and silver-plated ferrule.
FR10GG25V25P - H083957 FR10GG40V6P - Y084799 FR10GG50V2 - D213098 FR10GG50V8- D217169
FR10GG25V32P - E083954 FR10GG40V8P - F083955 FR10GG50V20 - D211028 FR10GG50V8I -V219231
FR10GG40V10P-A084801 FR10GG50V0.5-C211027 FR10GG50V20I-X211551 FR10GG69V1-R302787
FR10GG40V12P - G083956 FR10GG50V1 - B212061 FR10GG50V25 - E213099 FR10GG69V10 -X302792
FR10GG40V16P - X084798 FR10GG50V10 - S218194 FR10GG50V25I - W212585 FR10GG69V12 -Y302793
FR10GG40V20P - Z084800 FR10GG50V10I - E222207 FR10GG50V2I - S216653 FR10GG69V16 -Z302794
FR10GG40V2P - G083703 FR10GG50V12 - W219761 FR10GG50V4 - X213598 FR10GG69V2 - S302788
FR10GG40V32 - A214107 FR10GG50V12I - H200751 FR10GG50V4I - E217170 FR10GG69V4 - T302789
FR10GG40V32I - Z213600 FR10GG50V16 - G200750 FR10GG50V6 - K215128 FR10GG69V6 - V302790
FR10GG40V4P - D084758 FR10GG50V16I - H201809 FR10GG50V6I - T218195 FR10GG69V8 - W302791
K215128 FR10GG50V6 Insurance 6A 500V Fuse GG/GL 10x38 120KA
¥2.40
Product description
Fuse is a kind of protection of electrical and electronic components, it is usually in series in the circuit, when the fault current increases to a certain value, its own fuse and cut off the circuit, to protect the purpose of other equipment in the circuit, in the current protection component is the most commonly used fuse.
Fuse use precautions:
1, the protection characteristics of the fuse should be compatible with the overload characteristics of the protected object, taking into account the possible short-circuit current, choose the corresponding breaking capacity of the fuse;
2, the rated voltage of the fuse to adapt to the line voltage level, the rated current of the fuse should be greater than or equal to the rated current of the melt;
3, the rated current of the fuse at all levels of the line should be matched accordingly, and the rated current of the previous melt must be greater than the rated current of the next melt;
4, the fuse of the melt should be used as required, and it is not allowed to increase the melt or replace the melt with other conductors.
Fuse inspection:
1. Check whether the rating of the fuse and melt is compatible with the protected equipment;
2, check the appearance of the fuse for damage, deformation, porcelain insulation part for flicker discharge traces;
3, check whether the contact points of the fuse are intact, close contact, and there is no overheating phenomenon;
4. Whether the fuse signal indicator is normal.
Fuse service maintenance:
1. When the melt is fusing, the reasons for the fusing should be carefully analyzed. The possible reasons are:
1) Short circuit fault or overload operation and normal fusing;
2) The use time of the melt is too long, the melt is oxidized or the temperature is high in operation, so that the melt characteristics change and break;
3) There is mechanical damage when the melt is installed, which makes its cross-sectional area smaller and causes error in operation.
2. When disassembling the melt, it is required to:
1) Before installing the new melt, it is necessary to find out the cause of the melt meltdown, and do not disassemble the melt for test sending before determining the cause of the meltdown;
2) When replacing the new melt, check whether the rating of the melt matches the protected equipment;
3) When replacing the new melt, check the burn inside the fuse tube, if there is serious burn, the fuse tube should be replaced at the same time. When the porcelain fuse is damaged, it is not allowed to replace it with other materials. When replacing the melt, pay attention to filling the filler.
3, the fuse should be repaired at the same time as the power distribution device:
10×38mm gG 400/500/690V
Full range protection gG type 10 x 38mm fuses are suitable for industrial use with voltage options of 400VAC,500VAC,690VAC, most fuses are equipped with optional indicators. The fuse can optionally have a built-in firing pin. All cylindrical fuses have ceramic housing and silver-plated ferrule.
FR10GG25V25P - H083957 FR10GG40V6P - Y084799 FR10GG50V2 - D213098 FR10GG50V8- D217169
FR10GG25V32P - E083954 FR10GG40V8P - F083955 FR10GG50V20 - D211028 FR10GG50V8I -V219231
FR10GG40V10P-A084801 FR10GG50V0.5-C211027 FR10GG50V20I-X211551 FR10GG69V1-R302787
FR10GG40V12P - G083956 FR10GG50V1 - B212061 FR10GG50V25 - E213099 FR10GG69V10 -X302792
FR10GG40V16P - X084798 FR10GG50V10 - S218194 FR10GG50V25I - W212585 FR10GG69V12 -Y302793
FR10GG40V20P - Z084800 FR10GG50V10I - E222207 FR10GG50V2I - S216653 FR10GG69V16 -Z302794
FR10GG40V2P - G083703 FR10GG50V12 - W219761 FR10GG50V4 - X213598 FR10GG69V2 - S302788
FR10GG40V32 - A214107 FR10GG50V12I - H200751 FR10GG50V4I - E217170 FR10GG69V4 - T302789
FR10GG40V32I - Z213600 FR10GG50V16 - G200750 FR10GG50V6 - K215128 FR10GG69V6 - V302790
FR10GG40V4P - D084758 FR10GG50V16I - H201809 FR10GG50V6I - T218195 FR10GG69V8 - W302791